TITAN DRILLING LINES

Category:

Description

Anchor Lines:

Deteriorating Forces :

  • Abrasion
  • Drum/sheave wear fatigue
  • Crushing forces from multi-layer winding on drum
  • Shock load

Properties required:

  • Flexibility
  • Abrasion resistance
  • Stable construction to absorb crushing forces
Construction Nominal Rope Diameter
Rope (in.) (mm)
6x19S 1 to 1-1/2 25 to 38
6x26SW 1-1/4 to 2-1/4 32 to 58

Drillflex

Nominal Rope Diameter Approx. Mass Minimum Breaking Force
(in.) (mm) (lb/ft) (kg/m) EIPS EEIPS
MT KN MT KN
1 26 1.85 2.75 46.9 460 51.6 506
1-1/8 29 2.34 3.48 58.9 578 64.9 636
1-1/4 32 2.89 4.30 72.5 711 79.7 782
1-3/8 35 3.49 5.19 87.1 854 96.2 943
1-1/2 38 4.16 6.19 103 1010 113 1110
1-5/8 42 4.88 7.26 119 1170 133 1300
1-3/4 45 5.66 8.42 139 1360 153 1500
1-7/8 48 6.49 9.66 158 1550 174 1710
2.0 52 7.39 11.0 179 1760 197 1930
2-1/8 54 8.34 12.4 201 1970 220 2160
2-1/4 58 9.35 13.9 224 2200 247 2420

Drillform

Nominal Rope Diameter Approx. Mass Minimum Breaking Force
In. mm lb/ft kg/m 1770 1960
MT KN MT KN
1 26 2.00 2.97 47.0 461 53.9 529
1-1/8 29 2.53 3.76 59.6 584 68.3 670
1-1/4 32 3.12 4.64 73.5 721 84.3 827
1-3/8 35 3.77 5.61 88.9 872 102 1000
1-1/2 38 4.37 6.50 104 1023 120 1176
1-5/8 42 5.13 7.63 122 1023 120 1176
1-3/4 45 5.95 8.85 142 1393 163 1600
1-7/8 48 6.83 10.2 163 1599 187 1838
2.0 52 7.77 11.6 185 1819 213 2090
2-1/8 54 8.76 13.0 206 2022 237 2328
2-1/4 58 9.83 14.6 231 2270 266 2613

Note: The Wire Rope conforms to the applicable sections of API Specification 9A

Reviews

There are no reviews yet.

Be the first to review “TITAN DRILLING LINES”

Your email address will not be published. Required fields are marked *